Reviewers list
We sincerely thank the reviewers of Zaštita Materijala for their valuable time and voluntary efforts in improving the quality of the papers we publish. Your insightful feedback and dedication are essential to maintaining high academic standards and supporting the mission of our diamond open-access journal.
Editorial Board of Zaštita Materijala
_________________________________________
Prof. Dr Milan Antonijević, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija;
Prof. Dr Miomir Pavlović, Univerzitet u Beogradu, Tehnološko-metalurški fakultet, Beograd, Srbija;
Prof. Dr Časlav Lačnjevac, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Radomir Folić, Emeritus, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Novi Sad, Srbija;
Prof. Dr Vesna Mišković-Stanković, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Prof. Dr Miodrag Maksimović, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Prof. Dr Vladimir Panić, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Prof. Dr Dragica Jevtić, Univerzitet u Beogradu, Građevinski fakultet, Beograd, Srbija;
Dr Miodrag Stojanović, Vojnotehnički institut, Beograd, Srbija;
Prof. Dr Petar Živković, Univerzitet u Podgorici, Metalurško-tehnološki fakultet, Podgorica, Crna Gora;
Prof. Dr Branislav Nikolić, Univerzitet u Prištini, Fakultet tehničkih nauka, Kosovska Mitrovica, Srbija;
Prof. Dr Dragan Veselinović, Univerzitet u Beogradu, Fakultet za fizičku hemiju, Beograd, Srbija;
Prof. Dr Veselin Batalović, Univerzitet u Beogradu, Rudarsko-geološki fakultet, Beograd, Srbija;
Dr Nebojša Nikolić, Naučni savetnik, Univerzitet u Beogradu, IHTM, Beograd, Srbija;
Prof. Dr Jelena Pješčić, Univerzitet u Podgorici, Metalurško-tehnološki fakultet, Podgorica, Crna Gora;
Prof. Dr Refik Zejnilović, Univerzitet u Podgorici, Metalurško-tehnološki fakultet, Podgorica, Crna Gora;
Dr Mile Dimitrijević, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Prof. Dr Karlo Raić, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Dr Mirjana Stojanović, Naučni savetnik, ITNMS, Beograd, Srbija;
Dr Zvonko Gulišija, Naučni savetnik, ITNMS, Beograd, Srbija;
Dr Zoran Karastojković, Naučni saradnik, Visoka tehnička škola, Novi Beograd, Srbija;
Prof. Dr Nedeljko Krstajić, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Dr Ljiljana Gajić-Krstajić, Naučni savetnik, Institut tehničkih nauka SANU, Beograd, Srbija;
Dr Jasmina Stefanović, Naučni savetnik, Univerzitet u Beogradu, IHTM, Beograd, Srbija;
Prof. Dr Miladin Gligorić, Univerzitet Istočno Sarajevo, Tehnološki fakultet, Zvornik, Republika Srpska;
Prof. Dr Nikola Ristić. Emertitus, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Milan Jakšić, Institute of Chemical Engineering Sciences, FORTH, Patras, Greece;
Prof. Dr Dragica Čamovska, Univerzitet ''Kirilo i Metodije'', TMF, Skopje, Makedonija;
Prof. Dr Fehim Korać, Univerzitet u Sarajevu, Tehnološki fakultet, Sarajevo, BiH;
Prof. Dr Evica Ivanović, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Aleksandar Đorđević, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Jelena Đorđević, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Zoran Rajić, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Sreten Jelić, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Dejan Bezbradica, Univerzitet u Beogradu, Tehnološko-metalurški fakultet, Beograd, Srbija;
Dr Zoran Avramović, Naučni saradnik, RTB, Bor, Srbija;
Dr Vlada Jović, Naučni savetnik, Univerzitet u Beogradu, IMSI, Beograd, Srbija;
Dr Nevenka Elezović, Naučni savetnik,Univerzitet u Beogradu, IMSI, Beograd, Srbija;
Dr Uroš Lačnjevac, Viši naučni saradnik, Univerzitet u Beogradu, IMSI, Beograd, Srbija;
Dr Borka Jović, Naučni savetnik, Univerzitet u Beogradu, IMSI, Beograd, Srbija;
Prof. Dr Milorad Tomić, Univerzitet Istočno Sarajevo, Tehnološki fakultet, Zvornik, Republika Srpska;
Prof. Dr Ace Dimitrov, Univerzitet ''Kirilo i Metodije'', TMF, Skoplje, R.Makedonija;
Prof. Dr Filip Kokalj, Univerzitet u Mariboru, Tehnički fakultet, Maribor, Slovenija;
Prof. Dr Sonja Martinez, Univerzitet u Zagrebu, Fakultet za strojarstvo, Zagreb, Hrvatska;
Prof. Dr Vesna Alar, Univerzitet u Zagrebu, Tehnološki fakultet Zagreb, Hrvatska;
Prof. Dr Ivan Stojanović, Univerzitet u Zagrebu, Fakultet za strojarstvo, Zagreb Hrvatska;
Dr Ivan Krastev, Naučni savetnik, Institut tehničkih nauka, Bulgarian Academy of Sciences, Sofija, Bugarska;
Prof. Dr Nebojša Ralević, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Blažo Lalević, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Milovan Jotanović, Univerzitet Istočno Sarjevo,Tehnološki fakultet, Zvornik, Republika Srpska;
Dr Anžej Koval, Naučni savetnik, Institut Krakov, Krakov, Poljska;
Prof. Dr Kozeta Vaso, Univerzitet u Tirani, Tehnički fakultet, Tirana, Albanija;
Prof. Dr Vaso Novaković, Univerzitet Istočno Sarajevo,Tehnološki fakultet, Zvornik, Republika Srpska;
Prof. Dr Slobodan Sokolović, Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija;
Prof. Dr Radmila Šećerov-Sokolović, Univerzitet u Novom Sadu, PMF, Novi Sad, Srbija;
Dr Miroslav Sokić, naučni savetnik, ITNMS, Beograd, Srbija;
Dr Marija Mihajlović, viši naučni saradnik, ITNMS, Beograd, Srbija;
Dr Zoran Janjušević, viši naučni saradnik, ITNMS, Beograd, Srbija;
Prof. Dr Đenđi Vaštag, Univerzitet u Novom Sadu, PMF, Novi Sad, Srbija;
Dr Branka Kaluđerović, naučni savetnik INN Vinča, Beograd, Srbija;
Dr Jelena Milojčić, naučni saradnik, ITNMS, Beograd, Srbija;
Dr Marija Petrović, naučni saradnik, ITNMS, Beograd, Srbija;
Dr Srećko Manasijević, viši naučni saradnik, Institut Lola, Beograd, Srbija;
Prof. Dr Borislav Milinović, Univerzitet u Banja Luci, Tehnološki fakultet, Banja Luka, R.Srpska;
Prof. Dr Borko Matijević, Univerzitet u Novom Sadu, PMF, Novi Sad, Srbija;
Prof. Dr Ljiljana Rašković, Univerzitet u Nišu,Tehnološki fakultet, Leskovac, Srbija;
Prof. Dr Milan Jaić, Univerzitet u Beogradu, Šumarski fakultet, Beograd, Srbija;
Prof. Dr Milanka Điporović, Univerzitet u Beogradu, Šumarski fakultet, Beograd, Srbija;
Prof. Dr Branislav Grgur, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Prof. Dr Milica Radovanović, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Prof. Dr Milan Sak Bosner, Univerzitet u Zagrebu, Tehnološki fakultet, Osjek, Hrvatska;
Prof. Dr Ivana Grmuša, Univerzitet u Beogradu, Šumarski fakultet, Beograd, Srbija;
Prof.Dr.habil. Marian Jaskula, Full Professor - Jagiellonian University, Cracow, Poland;
D-r enj. Bogomil Velikov Kolev, Institute of technical scientific Sofia, Bulgaria;
Prof. Dr Radu Claudiu Fierascu, ICECHIM, Bucharest, Romania;
Prof. Dr Dumitru Tsiulyanu, Technical University, Chisinau, Moldava;
Prof. Dr Jadranka Malina, Univerzitet u Zagrebu, Metalurški fakultet, Sisak, Hrvatska;
Prof. Dr Štefan Nižnik, Technical University of Košice, Faculty of Metallurgy, Košice, Slovakia;
Prof. Dr Kiril Lisichkov, Univerzitet ''Kirilo i Metodije'', TMF, Skopje, Makedonia;
Prof. Dr Vineta Srebrenkoska, Goce Delčev University, Faculty of Technology, Štip, Makedonia;
Prof. Dr Emilija Fidancevska, Univerzitet ''Kirilo i Metodije'', TMF, Skopje, Makedonia;
Prof. Dr Vesna Dimova, Univerzitet ''Kirilo i Metodije'', TMF, Skopje, Makedonia;
Prof. Dr Romulus Dima, Politehnica University of Bucharest, Romania;
Dr Biljana Bobić, naučni savetnik, IHTM, Beograd, Srbija;
Dr Bore Jegdić, Univerzitet u Beogradu, IHTM, Beograd, Srbija
Prof. Dr Irena , Bulgarian Academy of Sciences, Sofia, Bulgaria;
Prof. Dr Abd El-Aziz S. Fouda, El-Mansoura University, Faculty of Science, El-Mansoura, Egypt;
Prof. Dr Ayman. Y. El-Khateeb, Mansoura University, Faculty of Agriculture, Mansoura, Egypt;
Prof. Dr Hesham H. El-Zhery, Umm Al-Qura University, Health Science College at Al Leith, KSA, Egypt;
Prof. Dr Mohamed Fakih, Health Science College at Al Leith, KSA, Egypt;
Prof. Dr Samar A. Abd El-Maksoud, Port Said University, Faculty of Science, Port Said, Egypt;
Prof. Dr Samar A. Abd El-Salam, Port Said University, Faculty of Science, Port Said, Egypt;
Prof. Dr H.M. Mostafa, Port Said University, Faculty of Science, Port Said,Egypt;
Prof. Dr Nabila M. Elbahrawi, Mansoura University, Faculty of Agriculture, Mansoura, Egypt;
Prof. Dr Ayman Y. El-Khateeb, Mansoura University, Faculty of Science, Mansoura, Egypt;
Dr.sc.Antonija Višekruna, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, Croatia;
Prof. Dr Jagoda Radošević, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, Croatia;
Dr Petar Ljumović, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, Croatia;
Dr Srdjan Matijašević,viši naučni saradnik, ITNMS, Beograd, Srbija;
Dr Branislav Marković, naučni saradnik, ITNMS, Beograd, Srbija;
Dr Nebojša Labus, naučni saradnik, Institute of Technical Sciences of the SASA, Belgrade, Serbia;
Prof. Dr Szilvia Ormándi, Dept. of Mineralogy, Eötvös Loránd University, Budapest, Hungary;
Prof. Dr István Dódony, Dept. of Mineralogy, Eötvös Loránd University, Budapest, Hungary;
Prof. Dr Munhjargal Dashnyam, Defenve university of Mongolia, Department of Mathematics and Computer Technology, Ulan Bator, Mongolia;
Dr Oyuntsetseg Janchiv, Institute of Chemistry and Chemical technology, of Mongolian Academy of Sciences, Ulan Bator, Mongolia;
Dr Ulambayar Renchinhand, Institute of Chemistry and Chemical technology, of Mongolian Academy of Sciences, Ulan Bator, Mongolia;
Dr Ganbaatar Jamsranjav, Institute of Chemistry and Chemical technology, of Mongolian Academy of Sciences, Ulan Bator, Mongolia;
Prof. Dr Ljubica Vаsiljević, Univerzitet Istočno Sarjevo, Tehnološki fakultet, Zvornik, Republika Srpska;
Prof. Dr Branislav Škundrić, Akаdemijа nаukа i umjetnosti R. Srpske, Banja Luka, Republika Srpska;
Prof. Dr Dragan Tošković, Univerzitet Istočno Sarjevo, Tehnološki fakultet, Zvornik, Republika Srpska;
Prof. Dr Dušan Stanojević, Univerzitet Istočno Sarjevo, Tehnološki fakultet, Zvornik, Republika Srpska;
Prof. Dr Vesna Grekulović, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija;
Prof. Dr Mirjana Rajčić-Vujasinović, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija;
Prof. Dr Zoran Stević, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija;
Prof. Dr F.M. Mulimbayan, Department of Mining, Metallurgical and Materials Engineering, University of the Philippines, Diliman, Quezon City, Philippines;
Prof. Dr E.M. Olegario-Sanchez, Department of Mining, Metallurgical and Materials Engineering, University of the Philippines, Diliman, Quezon City, Philippines;
Prof. Dr A.A. Parreño, Department of Mining, Metallurgical and Materials Engineering, University of the Philippines, Diliman, Quezon City, Philippines;
Prof. Dr R.M. Cervera, Department of Mining, Metallurgical and Materials Engineering, University of the Philippines, Diliman, Quezon City, Philippines;
Prof. Dr D.M. Aguila, Department of Mining, Metallurgical and Materials Engineering, University of the Philippines, Diliman, Quezon City, Philippines;
Prof. Dr M.V. Ligaray, Department of Mining, Metallurgical and Materials Engineering, University of the Philippines, Diliman, Quezon City, Philippines;
Prof. Dr R.V. Mariano, University of the Philippines, Diliman, Quezon City, Philippines;
Prof. Dr H.D. Mendoza, University of the Philippines, Diliman, Quezon City, Philippines;
Dr Valentina A. Nikashina, Vernadsky Institute of Geochemistry and Analytical Chemistry RAS, Moscow, Russia;
Dr Inna B. Serova, Vernadsky Institute of Geochemistry and Analytical Chemistry RAS, Moscow, Russia;
Dr Tatjana G. Kusmina, Vernadsky Institute of Geochemistry and Analytical Chemistry RAS, Moscow, Russia;
Dr Irma A. Roschina, Vernadsky Institute of Geochemistry and Analytical Chemistry RAS, Moscow, Russia;
Dr Irina N. Gromyak, Vernadsky Institute of Geochemistry and Analytical Chemistry RAS, Moscow, Russia;
Dr Nadezhda Lihareva, Institute of Mineralogy and Crystallography, BAS,Sofia, Bulgaria;
Dr Ognjan Petrov, Institute of Mineralogy and Crystallography, BAS,Sofia, Bulgaria;
Prof. Dr Vincenzo Leone, Department of Environmental, Biological and Pharmaceutical Science and Technologies, Second University of Naples, Caserta, Italy;
Prof. Dr Pasquale Iovino, Department of Environmental, Biological and Pharmaceutical Science and Technologies, Second University of Naples, Caserta, Italy;
Prof. Dr Elio Coppola, Department of Environmental, Biological and Pharmaceutical Science and Technologies, Second University of Naples, Caserta, Italy;
Prof. Dr Stefano Salvestrini, Department of Environmental, Biological and Pharmaceutical Science and Technologies, Second University of Naples, Caserta, Italy;
Prof. Dr Sante Capasso, Environmental Technologies University Spin-off, Second University of Naples, Caserta, Italy;
Prof. Dr Tore Krogstad, Norwegian University of Life Sciences, Faculty of Environmental Science and Technology, Norway;
Prof. Dr Nevenka Rajić, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Dr Milan Kragović, naučni saradnik, ITNMS, Beograd, Srbija;
Dr Aleksandra Daković, naučni savetnik, ITNMS, Beograd, Srbija;
Prof. Dr Blagica Cekova, MIT University, Faculty of ecological resources menagment, Skopje, R.Macedonia;
Prof. Dr Filip Jovanovsk, University of Skopje, Faculty of Technology and Metallurgy, Skopje, R. Macedonia;
Dr Jelena Pavlović, University of Belgrade, Innovation Centre of the Faculty of TMF, Belgrade, Serbia;
Dr Jelena D. Rusmirović, University of Belgrade, Innovation Centre of the Faculty of TMF, Belgrade, Serbia;
Prof. Dr Milica Rančić, Univerzitet u Beogradu, Šumarski fakultet, Beograd, Srbija;
Prof. Dr Aleksandar D. Marinković, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Dr Branimir Jugović, Univerzitet u Beogradu, Tehnički institut SANU, Beograd, Srbija;
Prof. Dr Zorica Jugović, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Dr Karmina Miteva, University of Skopje, Faculty of Technology and Metallurgy, Skopje, R.Macedonia;
Prof. Dr Slavčo Aleksovski, University of Skopje, Faculty of Technology and Metallurgy, Skopje, R.Macedonia;
Prof. Dr Gordana Bogoeva-Gaceva, University of Skopje, Faculty of Technology and Metallurgy, Skopje, R. Macedonia;
Prof. Dr Ivan Juranić, University of Belgrade, Faculty of Chemistry and Center for Chemistry IChTM, Belgrade,
Prof. Dr Slađana Č. Alagić, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija;
Prof. Dr Dragana V. Medić, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija;
Prof. Dr Mile D. Dimitrijević, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija;
Prof. Dr Snežana B. Tošić, Univerzitet u Nišu, Fakultet za nauku i matematiku, Niš, Srbija;
Dr Ljiljana Avramović, naučni savetnik, Institut za metalurgiju i rudarstvo, Bor, Srbija;
Dr Zoran Stevanović, naučni savetnik, Institut za metalurgiju i rudarstvo, Bor, Srbija;
Dr Mile Bugarin, naučni savetnik, Institut za metalurgiju i rudarstvo, Bor, Srbija;
Dr Radojka Jonović, naučni savetnik, Institut za metalurgiju i rudarstvo, Bor, Srbija;
Dr Radmila Marković, naučni savetnik, Institut za metalurgiju i rudarstvo, Bor, Srbija;
Dr Vojka Gardić, naučni savetnik, Institut za metalurgiju i rudarstvo, Bor, Srbija;
Dr Marko Jonovic, Univerzitet u Beogradu, IHTM, Beograd, Srbija;
Prof. Dr Blažo Lalević, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Vera Raičević, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Aleksandar Đorđević, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Docent Dr Aleksandar Kostić, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija;
Prof. Dr Dragan Kiković, Univerzitet u Prištini, Prirodno-matematički fakultet, Kosovska Mitrovica, Srbija;
Prof. Dr Dragana Kukić, Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija;
Prof. Dr Marina Šćiban, Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija;
Prof. Dr Jelena Pejin, Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija;
Dr Zorica Lopičić, naučni saradnik, ITNMS, Beograd, Srbija;
Dr Tatjana Šoštarić, naučni saradnik, ITNMS, Beograd, Srbija;
Dr Jelena Dragišić Maksimović, naučni savetnik, Univerzitet u Beogradu, IMSI, Beograd, Srbija;
Prof. Dr Miloš Mojović, Univerzitet u Beogradu, Fakultet za fizičku hemiju, Beograd, Srbija;
Dr Vuk Maksimović, naučni savetnik, Univerzitet u Beogradu, IMSI, Beograd, Srbija;
Prof. Dr Djurdja Kerkez, Univerzitet u Novom Sadu, PMF, Novi Sad, Srbija;
Prof. Dr Milena Bečelić-Tomin, Univerzitet u Novom Sadu, PMF,Novi Sad, Srbija;
Prof. Dr Božo Dalmacija, Univerzitet u Novom Sadu, PMF, Novi Sad, Srbija;
Prof. Dr Dragana Tomašević Pilipović, Univerzitet u Novom Sadu, PMF, Novi Sad, Srbija;
Prof. Dr Miljana Prica, Univerzitet u Novom Sadu, fakultet tehničkih nauka, Novi Sad, Srbija;
Prof. Dr Marko Milojković, Univerzitet u Beogradu, Fakultet za biologiju, Beograd, Srbija;
Dr Bogdan Nikolić, naučni savetnik, Institut za zaštitu bilja i životnu sredinu, Beograd, Srbija;
Prof. Dr Miloš Marinković, Univerzitet u Nišu, PMF, Niš;
Dr Panić Ivan, naučni saradnik, Institut Jaroslav Černi, Beograd, Srbija;
Dr Martina Ormai, Univerzitet u Novom Sadu, Poljoprivredni fakultet, Novi Sad, Srbija;
Prof. Dr Vera Pavlović, Univerzitet u Beogradu, Mašinski fakultet, Beograd, Srbija;
Dr Ranko Grujić, Univerzitet Istočno Sarjevo, TF Zvornik, Republika Srpska;
Prof. Dr Vlada Veljković, Univerzitet u Nišu, Tehnološki fakultet, Leskovac, Srbija;
Prof. Dr Goran Ilić, Univerzitet u Nišu, Tehnološki fakultet, Leskovac, Srbija;
Prof. Dr Suzana Cakić, Univerzitet u Nišu, Tehnološki fakultet, Leskovac, Srbija;
Prof. Dr Slavka Stanković, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Dr Tamara Jakovljević, naučni savetnik, Hrvatski institut za istraživanje prirode, Jastrebarsko, Hrvatska;
Prof. Dr Ivana Radojčić Redovniković, Univerzitet u Zagrebu, Fakultet za prehrambenu tehnologiju, Zagreb, Hrvatska;
Prof. Dr Vjekoslav Sajfert, Univerzitet u Novom Sadu, Tehnicki fakultet u Zrenjaninu, Zrenjanin, Srbija;
Prof. Dr Dragan Rakovic, Univerzitet u Beogradu, Elektrotehnički fakultet, Beograd, Srbija;
Prof. Dr Goran Jankes, Univerzitet u Beogradu, Mašinski fakultet, Beograd, Srbija;
Akademik Vlatko Doleček, Akademija nauka i umjetnosti Bosne i Hercegovine, Sarajevo, BiH;
Prof. Dr Slaviša Putić, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Prof. Dr Aleksandar Marinković, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Docent Dr Milica Rančić, Univerzitet u Beogradu, Šumarski fakultet, Beograd, Srbija;
Docent Dr Tanja Pralija, Univerzitet u Beogradu, Šumarski fakultet, Beograd, Srbija;
Prof. Dr Željko Kamberović, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Prof. Dr Enes Dzunuzovic, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Prof. Dr Gordana Kokeza, Univerzitet u Beogradu, TMF, Beograd, Srbija;
Prof. Dr Pero Dugić,Univerzitet u Banja Luci, Tehnološki fakultet, Banja Luka, R.Srpska;
Docent Dr Ivan Ristić, Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija;
Prof. Dr Miroslav Spasojević, Univerzitet u Kragujevcu, Agronomski fakultet, Čačak, Srbija;
Prof. Dr Lenka Grbić, Univerzitet u Kragujevcu, Agronomski fakultet, Čačak, Srbija;
Dr Dragoslav Bekrić, naučni saradnik, Univerzitet u Beogradu, Mašinski fakultet, Beograd, Srbija;
Prof. Dr Jovan Šetrajčić, Univerzitet u Novom Sadu, Prirodno-matematički fakultet, Novi Sad, Srbija;
Prof. Dr Gordana Topličić Ćurčić, Univerzitet u Nišu, Građevinsko-arhitektonski fakultet, Niš, Srbija;
Dr Nebojša Marinković, Synchrotron Catalysis Consortium and Columbia University, New York, NY, USA;
Prof. Dr Kotaro Sasaki, Brookhaven National Laboratory, Upton, NY, USA;
Prof. Dr Dragana Grujić, Univerzitet u Banjoj Luci, Tehnološki fakultet, Banja Luka, BiH;
Prof. Dr Mirjana Kostić, Univerzitet u Beogradu, Tehnološko-metalurški fakultet, Beograd, Srbija
Doc.Dr Branko Neral, Univerza v Mariboru, Fakulteta za strojništvo, Maribor, Slovenija
Prof. Dr Tatjana Kaluđerović-Radoičić, Univerzitet u Beogradu, Tehnološko-metalurški fakultet, Beograd, Srbija
Prof. Dr Branko Bugarski, Univerzitet u Beogradu, Tehnološko-metalurški fakultet, Beograd, Srbija
Prof. Dr Aleksandar Sedmak, Univerzitet u Beogradu, Mašinski fakultet, Beograd, Srbija
Dr Vencislav Grabulov, naučni savetnik, Institut za ispitivanje materijala Srbije, Beograd, Srbija
Prof. Dr Milovan Vukovic, Univerzitet u Beogradu, Tehnicki fakultet u Boru, Bor, Srbija
Prof. Dr Ljiljana Takic, Univerzitet u Niš, Tehnoloski fakultet u Leskovcu, Niš, Srbija
Docent Dr Ivan Ristić, University of Novi Sad, Faculty of Technology Novi Sad, Novi Sad, Srbija
Prof. Dr Sanja Podunavac-Kuzmanović, University of Novi Sad, Faculty of Technology Novi Sad, Novi Sad, Srbija
Prof. Dr Lidija Jevrić, University of Novi Sad, Faculty of Technology Novi Sad, Novi Sad, Srbija
Prof. Dr Slavko Djuric, Univerzitet u Novom Sadu, Fakultet inženjerskih nauka, Novi Sad, Srbija
Prof. Dr Aleksandar Jovović, Univerzitet u Beogradu, Mašinski fakultet, Univerzitet u Beogradu, Beograd, Srbija
Prof. Dr Despo Fatta-Kassinos, Nireas-IWRC, University of Cyprus, Nicosia, Cyprus
Prof. Dr C.S. Poon, Polytechnic University, Department of Civil and Structural Engineering, The Hong Kong, Hong Kong
Prof. Dr Jagos Radovic, University of Calgary, Department of Geoscience, Calgary, Canada
Prof.dr, Milica Velimirovic, University of Vienna, Department of Environmental Geosciences, Vienna, Austria
Prof. Dr Mukesh Kumar Sinha, Defence Materials & Stores Research, Kanpur, Uttar Pradesh, India
Prof. Dr Marta Trninic, Univerzitet u Beogradu, Mašinski fakultet, Univerzitet u Beogradu, Beograd, Srbija
Prof. Dr Ivani Banković-Ilić, Univerzitet u Nišu, Tehnološki fakultet u Leskovcu, Leskovac, Srbija
Prof. Dr Dragan Đorđević, Univerzitet u Nišu, Tehnološki fakultet u Leskovcu, Leskovac, Srbija
Prof. Dr Slađana Alagić, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija
Prof. Dr Aleksandra Porjazoska Kujundziski, University of Skopje, Faculty of Engineering, Skopje, R. Macedonia
Dr Sanja Petronic, University of Belgrade, Innovation Center, Faculty of Mechanical Engineering, Belgrade, Serbia,
Dr Jana Štrbački, naučni saradnik, Univerzitet u Beogradu, Rudarsko-geološki fakultet, Beograd, Srbija
Prof. Dr Sanja Mrazovac, Univerzitet Union „Nikola Tesla“, Beograd, Srbija
Dr Milena Marinovic-Cincovic, naucni savetnik, Univerzitet u Beogradu, INN Vinca, Beograd, Srbija
Prof. Dr Goran Nikolic, Univerzitet u Nisu,Tehnološki fakultet u Leskovcu, Leskovac, Srbija
Prof. Dr Dragan Zunic, Karnegi Melon Univerzitety, Doha, Katar
Prof. Dr Milovan Vukovic, Univerzitet u Beogradu, Tehnicki fakultet u Boru, Bor, Srbija;
Dr Marija Babić, Univerzitet u Beogradu, Inovacioni centar TMF, Beograd, Srbija
Prof. Dr Dusan Cvetkovic, Univerzitet u Nisu, Gradjevinski fakultet, Nis, Srbija
Prof. Dr Grozdanka Bogdanović, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija
Prof. Dr Aleksandra Zarubica, Univerzitet u Nišu, Prirodno-matematički fakultet, Nis, Srbija
Prof. Dr Dragan Povrenovic, Univerzitet u Beogradu,TMF, Beograd, Srbija
Prof. Dr Ivana Boskovic, Univerzitet Crne Gore, Metalursko-tehnoloski fakultet, Podgorica, Podgorica,Crna Gora
Dr Vojislav Stanić, Univerzitet u Beogradu, Institut za nuklearne nauke Vinča, Beograd, Srbija
Dr Marin Tadić, Univerzitet u Beogradu, Institut za nuklearne nauke Vinča, Beograd, Srbija
Dr Jasmina Glamoclija, IBI "Siniša Stanković", Beograd, Srbija
Prof. Dr Shadi Darvish, Florida International University, Department of Materials Engineering, USA
Prof. Dr Iman Khakpour, Florida International University, Department of Materials Engineering, USA
Docent Dr Aleksandar Kostić, Univerzitet u Beogradu, Poljoprivredni fakultet, Beograd, Srbija
Prof. Dr Snežana Tošić, Univerzitet u Nišu, Prirodno-matematički fakultet, Nis, Srbija
Dr Ana Kostov, Institut za rudarstvo i metalurgiju Bor, Bor, Srbija
Dr Aleksandra Mitovski, Univerzitet u Beogradu, Tehnicki fakultet u Boru, Bor, Srbija
Dr El-Sayed M. Sherif, Advanced Manufacturing Institute (AMI), King Saud University, Saudi Arabia
Dr Michael E. G. Lyons, School of Chemistry, University of Dublin Trinity College, Ireland
Prof. Dr Radmila Jančić-Heinemann, Univerzitet u Beogradu, TMF, Beograd, Srbija
Dr Dejan Momčilović, Institut IMS, Beograd, Srbija
Dr Sanja Stevanović, IHTM, Univerzitet u Beogradu, Beograd, Srbija
Prof. Dr Suzana Samaržija-Jovanović, Univerzitet u Pristini, Prirodno-matematički fakultet, Kosovska Mitrovica
Prof. Zora Pilić, University of Mostar, Faculty of Science and Education, Mostar, Bosnia and Herzegovina
Prof. A. Y. El-Etre, Benha University, Faculty of Science, Department of Chemistry, Benha, Egypt
Prof. Femiana Gapsari, Brawijaya University, Faculty of Engineering, Mechanical Engineering Department, Malang, Indonesia
Dr Amin Rabiei, Islamic Azad University, Najafabad, Iran
Prof. Dr Farid I. El-Dossoki, Port-Said University, Chemistry Department, Faculty of Science, Port-Said, Egypt
Prof. Dr Alaa El-Hussein, Mansoura University, Chemistry Department, Faculty of Science, Mansoura, Egypt
Prof. Dr Hamd Abu El-Nadr, Mansoura University, Chemistry Department, Faculty of Science, Mansoura, Egypt
Dr Nataša V. Valentić, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
Dr Jelena M. Lađarević, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
Doc. Bojan Đ. Božić, University of Belgrade, Faculty of Biology, Belgrade, Serbia;
Prof. Dr Dušan Ž. Mijin, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
Prof. Dr Gordana S. Ušćumlić, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
Dr Darko Manjenčić, Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija
Dr Marina Kolundžić, University of Belgrade, Faculty of Pharmacy, Department of Pharmacognosy, Belgrade, Serbia
Dr Jelena Radović, University of Belgrade, Faculty of Pharmacy, Department of Pharmacognosy, Belgrade, Serbia
Dr Ana Tačić, University of Niš, Faculty of Technology, Leskovac, Serbia;
Dr Vesna Nikolić, University of Niš, Faculty of Technology, Leskovac, Serbia;
Prof. Dr Tatjana Kundaković, University of Belgrade, Faculty of Pharmacy, Belgrade, Serbia
Prof. Dr Milena Bečelić-Tomin, Univerzitet u Novom Sadu, Prirodno-matematički fakultet, Novi Sad, Srbija
Prof. Dr Nataša Slijepčević, Univerzitet u Novom Sadu, Prirodno-matematički fakultet, Novi Sad, Srbija
Prof. Dr Ratko Ivković, Univerzitet u Prištini, Fakultet tehničkih nauka, Kosovska Mitrovica, Srbija,
Prof. Dr Lazar Kopanja, Alfa BK Univerzitet, Fakultet informacionih tehnologija, Beograd, Srbija
Prof. Dr Mirjana Kostić, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
Prof. Dr Marija Vukčević, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
Dr Sahar Zolfaghari, Islamic Azad University, Najafabad, Iran
Dr Ali Ashrafi, Isfahan University of Technology, Department of Materials Engineering, Isfahan, Iran
Dr Ahmad Saatchi, Department of Materials Science and Engineering, University of Wisconsin-Madison, USA
Dr Leposava Filipović-Petrović, Visoka medicinska i poslovno-tehnološka škola strukovnih studija, Šabac, Srbija
Dr Mirjana Antonijević-Nikolić, Visoka medicinska i poslovno-tehnološka škola strukovnih studija, Šabac, Srbija
Dr Ljubica Mijić, Visoka medicinska i poslovno-tehnološka škola strukovnih studija, Šabac, Srbija
Dr Slađana B. Tanasković, University of Belgrade, Faculty of Pharmacy, Belgrade, Serbia
Prof. Dr Branka Dražić, University of Belgrade, Faculty of Pharmacy, Belgrade, Serbia
Dr Aleksandra S. Patarić, ITNMS, Beograd, Srbija
Dr Mihailo Mrdak, Istraživački i razvojni Centar, IMTEL komunikacije a.d., Beograd, Srbija
Dr Suzana R. Polić, Central institute for conservation, Belgrade, Serbia,
Dr Danijela N. Jovanović, Central institute for conservation, Belgrade, Serbia
docent Dr Dalibor Petkovic, University of Nis, Faculty of Mechanical Engingeering, Nis, Serbia
Prof. Dr Larisa Jovanovic, University of Educson, Sremska Kamenica, Serbia
Prof. Dr Vesna Stankov-Jovanovic, PMF, Univerzitet u Niu, Nis, Srbija
Prof. Dr Aleksandar Jokić, Faculty of Technology, University of Novi Sad, Novi Sad, Serbia
Prof. Dr Leonardo S.G.Teixeira, Instituto de Química-Universidade Federal da Bahia, Salvador, Bahia,
Prof. Dr M.P. Dorado, Department of Physical Chemistry and Applied Thermodynamics, EPS, Edificio Leonardo da Vinci, Universidad de Córdoba, Campus de Excelencia Internacional Agroalimentario, Córdoba, Spain,
Prof. Dr K. Noipin, School of Environment, Resources and Development, Asian Institute of Technology, Klong Luang, Thailand,
Prof. Dr sc. med. Dr Srđan Lazić, Institut za epidemiologiju VMA, Beograd, Srbija;
Prof. Dr Marie-Josée Dumont, Bioresource Engineering Department, McGill University, Ste-Anne-de-Bellevue, Canada,
Prof. Dr B. Ghobadian, Biosystems Engineering Department, Tarbiat Modares University, Tehran, Iran,
Dr Nina Obradović, Institut tehničkih nauka, Srprka akademija nauka i umetnosti, Beograd, Srbija,
Dr Katarina Čolić, Inovacioni centar, Univerzitet u Beogradu, Mašinski fakultet, Beograd, Srbija,
Dr Đorđe Veljović, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija,
Dr Milan Milivojevic, Inovacioni centar, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija,
prof. Dr Mlađan Popović, Univerzitet u Beogradu, Šumarski fakultet, Beograd, Srbija;
Prof. Dr Stevo Jacimovski, Univerzitet u Beogradu, Fakultet policijske akademije, Beograd, Srbija;
Dr Maja Kokunešoski, Univerzitet u Beogradu, Institut za nuklearne nauke „Vinča“, Beograd, Srbija;
Prof. Dr Ivica Dimkic, Univerzitet u Beogradu, Bioloski fakultet, Beograd, Srbija;
Prof. Dr Vedrana Komlen, Agromediteranski fakultet Mostar, Mostar, R.BiH,
Prof. Dr Snežana Urošević, Univerzitet u Beogradu, Tehnički fakultet u Boru, Bor, Srbija;
Prof. Dr Violeta Mitić, Univerzitet u Nišu, Prirodno-matematički fakultet, Niš, Srbija;
Prof. Dr Oskar Bera, Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija,
Prof. Dr Milena Miljković, Univerzitet u Nišu, Prirodno-matematički fakultet, Hemija, Niš, Srbija;
Prof. Dr sc. Zora Pilić, University of Mostar, Faculty of Science and Education, Mostar, BiH;
Doc. dr. sc. Sunčana Smokvina Hanza, Sveučilište u Rijeci, Tehnički fakultet, Rijeka, R.Hrvatska;
Prof. Dr sc. Veselinka Grudić, Univerzitet Crne Gore, Metalurško-tehnološki fakultet, Podgorica, Crna Gora;
Prof. Dr B. Muralidaran, Birla Institute of Technology Pilani, Sauthi Arabia;
Prof. Dr Jelena Lađarević, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Prof. Dr Ivana Savić Gajić, Univerzitet u Nišu, Tehnološki fakultet Leskovac, Leskovac, Srbija;
Prof. Dr A. Subramania, Pondicherry University, India;
Prof. Dr Jasmina Nikolić, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Prof. Dr John Amalraj, Periyar EVR Govt Arts College, Trichy, India;
Prof. Dr Peter Pascal Regis, St Joseph’ College, Trichy, India;
prof. Dr Maja Radetić, Tehnološko metalurški fakultet, Univerzitet, Beograd, Srbija;
Dr Biljana Popović, Visoka tekstilna strukovna škola za dizajn, tehnologiju i menadžment, Beograd, Srbija;
Dr Stanko Ostojić, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Dr Zoran Janjušević, ITNMS, Beograd, Srbija;
prof. Dr sc.med.Dr Srđan Lazić, Institut za epidemiologiju VMA, Beograd, Srbija;
Prof. Dr Sanjin Gutić, Univerzitet u Sarajevu, Prirodno-matematički fakultet, Sarajevo, R.BiH;
Prof. Dr Snezana Tosic, PMF, departman za hemiju, Univerzitet u Nisu, Nis, Srbija,
Dr. Ivana Perović, Institut za nuklearne nauke Vinča, Univerzitet u Beogradu, Beograd, Srbija,
Dr. Jelena Lović, IHTM - Centar za elektrohemiju, Univerzitet u Beogradu, Beograd, Srbija,
Dr A. S. Aisha, Federal University, Lokoja, Nigeria,
Prof. Dr Victor Jamila Salihu Ahuoiza, Tafawa Balewa University, Bauchi, Nigeria,
Dr. Malik Abdulwahab, Ahmadu Bello University, Nigeria,
Dr Milena Rašeta, naučni saradnik, PMF, Univerzitet u Novom Sadu, Novi Sad, Srbija,
Dr Aleksandra Božić, naučni saradnik, IC, TMF Beograd, Univerzitet u Beogradu, Beograd, Srbija,
Prof. Dr Goradana Drazic, Univerzitet Singidunum, Beograd, Srbija,
Prof. Dr Sergej Medvedev, Univerzitet u Ljubljani, Ljubljana, Slovenija,
Prof. Dr Aleksandar Dosic, Univerzitet u Istocnom Sarajevu, Tehnoloski fakultet, Zvornik, R.BiH,
Prof. Dr Boris Agarski, Fakultet tehnickih nauka, Univerzitet u Novom Sadu, Novi Sad, Srbija,
Dr Memon Hafeezullah, College of Textile Science and Engineering, Zhejiang Sci-Tech University, Hangzhou, China,
Prof. Dr Predrag Zivkovic, TMF, University of Belgrade, Belgrade, Serbia,
Prof. Dr Svjetlana Janjic, Faculty of Technology, University of Banjaluka, Banjaluka, BiH,
Prof. Dr Branka Dražić, Faculty of Pharmacy, University of Belgrade, Belgrade, Serbia,
Prof. Dr Mirjana Antonijević-Nikolić, Academy of applied studies Šabac, Sabac, Serbia,
Dr Vojislav Stanić, Vinca Institute of Nuclear Sciences, Belgrade, Serbia,
prof. Dr Vukosava Živković-Radovanović, Faculty of Chemistry, University of Belgrade, Belgrade, Serbia,
Prof. Dr Djordje Djatkov, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia,
Dr Zorica R. Lopičić, Institute for Technology of Nuclear and Other Mineral Raw Materials, Belgrade, Serbia,
Prof. Dr Maja Trumić, Univerzitet u Beogradu, Tehnički fakultet Bor, Bor, Srbija,
Bojana Danilovic, Univerzitet u Nišu, Tehnološki fakultet Leskovac, Leskovac, Srbija,
Dr Sanja Martinovic, TMF, Univerzitet u Beogradu, Beograd, Srbija,
prof. Dr Natalia Lesnych, Fakulttt fur Ingenieurwissenschaften, Hochschule Wismar, Germany,
Prof. Dr Leonid Dvorkin, Рівне, Україна,
Prof. Dr Elena Yatsenko, Platov South Russian State Polytechnic University (NPI), Новочеркасск, Россия,
Prof. Dr Vitaliy Petrovskyy, Київ, Україна,
Dr. Abdulhameed Al-Hashem, Kuwait Institute for Scientific Research (KISR), Kuwait,
Prof. Dr Rajendran Maria Joany, Sathyabama Deemed University, Chennai, Tamilnadu, India
Prof. Dr S. Senthil Kumaran, Vellore Institute of Technology (VIT), Tamilnadu, India
Prof. Dr Jamal Khatib, Beirut Arab University, Beirut, Jordan;
Prof. Dr Mohammed Sonebi, Queen’s University of Belfast, United Kingdom
Prof. Dr Lev Chernyak, National Technical University of Ukraine, Kyiv, Ukraine
Prof. Dr Nataša Đurišić-Mladenović, Univerzitet u Novom Sadu, Tehnoloski fakultet, Novi Sad, Srbija
Prof. Dr Mirjana Kostć, Univerzitet u Beogradu, Tehnološko metalurški fakultet, Beograd, Srbija;
Prof. Dr S Santhana Prabha, PSNA College of Engineering and Technology, Dindigul, Tamilnadu, India
Prof. Dr Piyush Kumar, Madan Mohan Malaviya University of Technology, Gorakhpur, India
Prof. Dr Sivaganesh Selvaraj, The Hong Kong Polytechnic University, Hong Kong
Prof. Dr R. Vijayalakshmi, Nandha Engineering College, Erode, Tamilnadu, India
Srdjan Perisic, IHTM, Belgrade, Serbia
Dr Dragutin Nedeljkovic, IHTM, Belgrade, Serbia
Dr Aleksandar Grujic, IHTM, Belgrade, Serbia
Dr Srdjan Perisic, IHTM, Belgrade, Serbia
Prof. Dr Vera Obradovic, TMF, University of Belgrade, Belgrade, Serbia,
Prof. Dr R Joseph Rathish, PSNA College of Engineering and Technology, Dindigul, Tamilnadu, India
Prof. Dr K Kavipriya, PSNA College of Engineering and Technology, Dindigul, Tamilnadu, India
Prof. Dr Gurmeet Singh, Pondicherry University, Puducherry, India
Prof. Dr T Shanthi, ARASU COLLEGE OF ARTS & SCIENCE FOR WOMEN, Karur, Tamilnadu, India
Prof. Dr Safija Herenda, PMF, Univerzitet u Sarajevu, Sarajevo, R.BiH
Prof. Dr Sanjin Gutić, PMF, Univerzitet u Sarajevu, Sarajevo, R.BiH
Dr Dimitrije PETROVIĆ, National Institute of the Republic of Serbia, University of Belgrade, Serbia
Prof. Dr Marjan Ranđelović, Prirodno-matematički fakultet Niš, Univerzitet u Nišu, Niš, Srbija
Prof. Dr Tijana Djuricic, TF, Univerzitet u Banja Luci, R.BiH
Dr Sasa Papuga, Masinski fakultet, Univerzitet u Banja Luci, R.BiH
Prof. Dr Heba Adnan Ahmed, Sulaimani Polytechnic University, Sulaymaniyah, KRI, Iraq
Dr Sarvat Gull, National Institute of Technology, Hazaratbal, Srinagar, India
Prof. Dr A Krishnaveni, PG Department of Chemistry, Yadava College, Maduai, India
Prof. Dr Roman Tselms, State University of Aerospace Instrumentation, Russia
Prof. Dr Mikhail Egorov, State University of Aerospace Instrumentation, Russia
Prof. Dr Ekaterina Tsobkallo, State University of Industrial Technologies and Desig, Saint Petersburg, Russia
Prof. Dr R.Y. Hiranmai, School of Environment and Sustainable Development, Central University of Gujarat, Gandhinagar, India
Prof. Dr Jelena Vukmirović, University of Novi Sad, Faculty of Technology, Novi Sad, Novi Sad, Serbia
Dr Jelena Petrović, Institut ITNMS, Beograd, Srbija
Dr Jelena Nikolić, Institut ITNMS, Beograd, Srbija
Prof. Dr Pramod K Singh, Sharda University, India
Prof. Dr Bhaskar Bhattacharya, Banarus Hindu University, India
Prof. Dr Snezana Grujic, TMF, University of Belgrade, Belgrade, Serbia,
Dr Sasa Miletic, Institut IMS, Belgrade, Serbia,
Prof. Dr Marija Petrović Mihajlović, TMF, University of Belgrade, Belgrade, Serbia,
Prof. Dr Marjan Ranđelović PMF, Universitet u Nisu, Nis, Srbija
Prof. Dr Sanja Panić, University of Novi Sad, Faculty of Technology, Novi Sad, Novi Sad, Serbia
Prof. Dr Jelena Pavličević, University of Novi Sad, Faculty of Technology, Novi Sad, Novi Sad, Serbia
Dr Mirjana Petronijević, University of Novi Sad, Faculty of Technology, Novi Sad, Novi Sad, Serbia
Docent Olga Govedarica, University of Novi Sad, Faculty of Technology, Novi Sad, Novi Sad, Serbia
Prof. Dr Ali I. Al-Mosawi, University of Baghdad, Baghdad, Iraq
Prof. Dr Kadhim F. Al-Sultani, University of Babylon, Babylon, Iraq
Vesna Teofilovic, University of Novi Sad, Faculty of Technology, Novi Sad, Novi Sad, Serbia
Prof. Dr Shaymaa Abbas, Department of Materials Engineering, Faculty of Engineering, University of Kufa, Iraq
Prof. Dr Sreekanth B Jonnalagadda, School of Chemistry & Physics, College of Agriculture, Engineering & Science, University of KwaZulu-Natal, Durban, SOUTH AFRICA.
Dr. Kryzhanovskiy Vitaliy, University of Stuttgart, Germany
Prof. Dr Sergii Tolmachov, Kharkiv National Automobile and Highway University, KharkOv, Ukraine
Prof. Dr Iakov Iskhakov, Department of Civil Engineering, Ariel University, Israel
Mehdi Shahedi Asl, Department of Mechanical Engineering, University of Mohaghegh Ardabili, Ardabil, Iran
Dr. Natalia Rey-Raap, CSIC-Instituto de Ciencia y Tecnología del Carbono, Oviedo, Spain
Yong-KangLv, Key Laboratory of Coal Science and Technology of Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
Prof. Dr Tanja Palija, University of Belgrade, Faculty of Forestry, Belgrade, Serbia
Rui-PengRen, Key Laboratory of Coal Science and Technology of Ministry of Education and Shanxi Province, Taiyuan University of Technology, Shanxi, China
BelénLobato, Instituto de Ciencia y Tecnología del Carbono,INCAR-CSIC, Oviedo, Spain
Dr. Arzu Karayel, Hitit University, Faculty of Arts and Sciences, Corum, TURKEY
Prof. Dr Noor Haida, School of Chemical Sciences, Universiti Sains Malaysia, Penang, Malaysia
Prof. Dr K. Kavitha, Department of chemistry, National college, Trichy, India
Prof. Dr Gurmeet Singh, Pondicherry University, Puducherry, India
Prof. Dr Enis Dzunuzovic, TMF, University of Belgrade, Belgrade, Serbia
Prof. Dr S. Santhana Praba, PSNA College of engineering and technology, Dindigul, India
Prof. Dr R. Joseph Rathish, PSNA College of engineering and technology, Dindigul, India
Prof. Dr Saroj K. Shukla, Bhaskaryacharya College of Applied Sciences, University of Delhi, Delhi, INDIA
Prof. Dr Branka Petković, Prirodno-matematički fakultet Univerziteta Prištini, Priština, Serbia
Dr Aleksander Kovacevic, Institute of Physics, University of Belgrade, Belgrade, Serbia
Dr. Milica Košević, NU IHTM - Centar za elektrohemiju, Belgrade, Serbia
Prof. Dr Ekaterina Sergeevna Tsobkallo, Head of the Department of Engineering Materials Science and Metrology, State University, Saint Petersburg, Ukraina
Anđela Simović, IHTM, Belgrade, Serbia
Prof. Dr Vinicio R. Benalcázar-Rojas, Universidad Politécnica Estatal del Carchi, Posgrado, Av. Universitaria y Antisana, Carchi, Ecuador
Dr Ivana Perović, Univerzitet u Beogradu, Institut za nuklearne nauke VINČA, Beograd, Srbija
Prof. Dr Usama Asif, Department of Civil Engineering, Nazarbayev University, Nazarbayev, Kazakhstan
Sara Abd ElMoied Sayed, Institute of Raw and Building Materials, Housing and Building National Research Center, ElTahrir St., Giza, Egypt
Prof. Dr Jamila El Gaayda, Physical Chemistry and Environment Team, Faculty of Sciences, University of Ibn Zohr, Agadir, Morocco
Prof. Dr Beatriz Siqueira Tihameri, Environmental Engineering Department, Institute of Science and Technology, São Paulo State University (Unesp), São José dos Campos 12245-000, Brazil
Prof.dr. O. M. Abioye, Landmark University SDG 6 (Clean Water and Sanitation Research Group), Nigeria
Prof. Dr Maksim V. Stogov, Ilizarov National Medical Research Centre for Traumatology and Orthopedics, Kurgan, Russian Federation
Prof. Dr Ali I. AL-MOSAWI, Institute of Ceramic and Polymer Engineering, University of Miskolc, Hungary
Prof. Dr Sharanabasava V. Ganachari, School of Advanced Sciences, KLE Technological University, Hubballi, Karnataka. INDIA
Prof. Dr Jingsong Huang, Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Oak Ridge, Tennessee, United States
Prof. Dr Jin-Hong Li. Department of Chemistry, The University of Chicago, Chicago, Ilinois
Prof. Dr Subhasis Roy, Department of Chemical Engineering University of Calcutta, Kolkata, India
Prof. Dr R. Mohanraj, Department of Civil Engineering, SRM Institute of Technology, Delhi NCR, Haryana, India
Prof. Dr Angeles G. De la Torre, Departamento de Química Inorgánica, Cristalografía y Mineralogía, Universidad de Málaga, Málaga, Spain
prof. Dr Akram O. Kadhum, Department of Civil Engineering, College of Engineering, University of Babylon, Iraq
Dr Subhasis Roy, Department of Chemical Engineering University of Calcutta, Kolkata, India
Prof. Dr Avinash Ravi Raja, Shandong university, Jinan, China
Prof.Dr. Emad El-Katory, Chemistry Department, Faculty of Science, Mansoura University, Mansoura-35516, Egypt
Prof.Dr. Myroslav Malovanyy, Viacheslav Chornovil Institute of Sustainable Development, Lviv Polytechnic National University, S. Lviv, Ukraine
Prof. Dr O. Y. Babatunde, Department of Civil Engineering, Pan African University Institute for Basic Sciences, Technology and Innovation (PAUSTI), Juja, Kenya
Dr Vladimir Dodevski, Institute for Nuclear Sciences "Vinča", Belgrade, Serbia
Prof. Dr Zakaria Ouaouja, Département de Physique, Faculté des Sciences, Université Moulay Ismail, Meknès, Morocco
Prof. Dr Mostafa M.H. Khalil, Chemistry Department, Faculty of Science, Ain Shams University, Abbassia, Cairo, Egypt
Dr Elmira Nurgaziyeva, National Laboratory Astana, Nazarbayev University, Astana, Kazakhstan;
Prof. Dr Abbas S. AL-Ameeri, Department of Civil Engineering, College of Engineering, University of Babylon, Iraq
Prof. Dr Dušan Dimic, Faculty of Physical Chemistry, University of Belgrade, Belgrade, Serbia
Dr Katarina Pantovic, Institute ITNMS, Belgrade, Serbia
Prof. Dr Sergey A Stel’makh, Department of Unique Buildings and Constructions Engineering, Don State Technical University, Rostov-on-Don, Russia
Prof. Dr O.M. Abioye, Department of Agricultural and Biosystems Engineering, Landmark University, Omu-Aran, Kwara State, Nigeria
Prof. Dr O.Y. Babatunde, Department of Civil Engineering, Pan African University, Institute for Basic Sciences, Technology and Innovation (PAUSTI), Juja, Kenya
Prof. Dr Halyna Sakalova, Vinnytsia Mykhailo Kotsiubynskyi State Pedagogical University, Ukraine
Prof. Dr A Subramania, Centre for nanoscience and technology, Pondicherry University, India
Dr. Diksha Singh, Department of Applied Sciences, Faculty of physics, Nicolaus Copernicus university in Torun, Poland
Prof. Dr Hee Woo Rhee, Sogang University, Seoul, South Korea
Dr Subhrajit Konwar, Noida institute of engineering and technology, Greater Noida, India
Dr Gopi Rajamanickam, Department of Civil Engineering, Adithya Institute of Technology, Coimbatore, India
Prof. Dr Srilatha Rao, Department of Chemistry, Nitte Meenakshi Institute of Technology, Yelahanka, Karnataka, India
